Projects

Reid’s Dome Gas Project

The Reid’s Dome Gas Project is contained within Production Lease 231, located approximately 50 kilometres southwest of Rolleston, in Central Queensland, and 50 kilometres west of the Queensland Gas Pipeline. Reid’s Dome is within the Bowen Basin on the apex of the Springsure-Serocold Anticline.

PL 231 is 100% owned by State Gas, providing the Company with maximum flexibility to drive development.

Geological structure of the Reid’s Dome at PL 231

Conventional gas

Conventional gas was discovered at Reid’s Dome during oil drilling in 1955, producing gas from gas sands in two zones, the shallow Cattle Creek Formation, a marine sandstone source rock, and the underlying Reid’s Dome Beds. Since that original discovery, a number of historical wells have flowed gas from the Cattle Creek Formation in the northern area of the permit, from depths of as shallow as 130 meters.

Indicative diagram of PL 231 Formations

Coal seam gas

In addition to conventional gas sands, the Reid’s Dome Beds contain extensive Permian coal measures throughout the permit. However, prior to State Gas, the area had not been explored for coal seam gas.

In late 2018 State Gas established the potential for PL 231 to contain a significant coal seam gas project with the drilling of the Nyanda-4 corehole.

In late 2019 the Company commenced a production test of Nyanda-4. In signs which are extremely positive for the commerciality of the Project, sustained gas production commenced after only five days of dewatering, with water production at the lowest end of the range for coal seam gas. Gas flows have consistently increased as the water level (and hence downhole pressure) has lowered. Both the gas flow and low water make are highly encouraging indicators for a commercial project.

Nyanda-4 gas flare – 9 January, 2020

The results of the field activities have been very encouraging. Drilling in the northern and central areas of the permit has confirmed the presence of the Reid’s Dome coal measures throughout the spine of PL 231 with gas content on a par with Nyanda-4.

In order to investigate the potential of coal seams across the permit State Gas drilled the Aldinga East-1A well (approximately 12km to the north of Nyanda-4), and the Serocold-1 well (approximately half way between). Both Aldinga East-1A and Serocold-1 confirmed the presence of coal measures, similar to those at Nyanda-4, in the northern and central domains of the permit. Both wells contain a significant number of seams showing permeability.

The Serocold-1 production test commenced in January 2020 and quickly (within the first week) provided indications of gas production commencing. From the early observations, the Company is confident that the Serocold-1 well will successfully produce CSG.

In a surprise development likely to benefit the commerciality of the field, the Aldinga East-1A well discovered a new conventional gas pool located in approximately 9m of gas sand in the Cattle Creek Formation. A gas sample taken from the well indicated it was pipeline quality gas. In addition to the conventional gas, the Aldinga East-1A well intersected 14.6 metres of net coal. The Company is confident this well will also successfully produce CSG.

The next phase of activities will confirm commerciality and inform development plans for the Project.

For latest developments click here.

Export pipeline

In August 2018 Pipeline Survey Licence 2028 was issued to the Company, enabling investigations to commence for a pipeline route to market. Work to date has given a high level of confidence that a viable route can be identified and quickly permitted, enabling an early commencement of construction. Discussions with potential pipeline partners have been progressing since the successful production testing results from Nyanda-4 at Reid’s Dome became available.

CSG is provided to the HDNG Facility by a gathering system connected to the Company’s Rougemont 2/3 dual lateral exploration and appraisal well (“Rougemont 2/3”), located within the Rolleston West Project area (ATP 2062)
Rougemont 2/3 produces high-energy content CSG with minimal impurities (methane >92%) which is dehydrated and compressed at the HDNG Pilot Plant
VP technology sourced through State Gas’ partnership with Mine Energy Solutions, allows delivery of HDNG by truck, in a range of up to 300km from the plant
State Gas has an initial offtake agreement in place to support an ongoing hybrid engine truck trial at a local coal mine in the Southern Bowen Basin (increasing to 300GJ/day, but with opportunity to scale)
State Gas has created substantial IP in the course of engineering, designing and constructing the HDNG Pilot Plant and in conjunction with its partners, is now evaluating how this technology might be more broadly applied (including design and construction of future HDNG plants that meet customer’s specific fuel demand circumstances)
HDNG Pilot Plant cost approximately $8 million (excluding research and development costs, civil works and gas gathering system)
1.5 year pay-back period at full plant operating capacity (1.7TJ/day)
Engineering progressed on next iteration of plant design - reduce fabrication costs and improve portability